Topcon GTS-600 Series, Инструкция по эксплуатации

Страница: 79 / 144

4-35
4 PROGRAM MODE
7
The next display shows the backsight angle.
If the angle correct, sight and lock the
instrument on the backsight point. Press [F5]
(YES) to accept the backsight orientation.
If you are not satisfied with the backsight
angle, press [F6] (NO) to return to step
6
a.
NOTE: Be sure you are sighted on the
correct backsight point and answer (YES),
the layout points will be incorrectly set.
8
Type in the instrument height and press
(ENT).
Type
Inst.
Height
9
a
Type in the point number to layout.
If the point number and its coordinates are
stored in memory, the display will advance to
step
10
.
If the point number and coordinates are not in
memory, follow step
9
b.
b
Type in the coordinates for the layout point.
Press (ENT) after each values. The program
will continue to step
10
.
(ENT)
Type
Point
Number
Type
Coord.
(ENT)
10
Type in the prism height for the layout point.
Type
Prism
Height
11
The angle and distance to the layout point is
shown on the display.
From the backsight point, the instrument must
be turned 50
°
10
'
16
"
to be online with the
layout point. The horizontal distance of
20.234 m is the distance from the instrument
to the layout point.
Explanation of options [F1] to [F6]
[F1] (ANG) - - This option will display the actual horizontal
angle (HR) and the layout horizontal angle (dHR). When
turning the instrument towards the layout point, the (HR)
will count up to the layout angle and the (dHR) will count
down to zero (0
°
0
'
0
"
).
Setting Direction Angle
BS:
H(B): 0°00'00"
>Set OK?
YES NO
Setting Layout Point
Inst.ht: 0.000
EXIT BS
Setting Layout Point
Inst.ht: 0.000
EXIT BS
PT# : 3
N :
E :
Z :
EXIT BS
Setting Layout Point
R.HT: 0.00
EXIT BS
dHR = 52°10'16"
dHD = 20.234m
ANG DIST F/C NEZ GUIDE NEXT
[F1] [F2] [F3] [F4] [F5] [F6]
HD* = 0°00'00"
dHD = -52°10'15"
ANG DIST F/C NEZ GUIDE NEXT
[F1] [F2] [F3] [F4] [F5] [F6]