Topcon GTS-600 Series, Инструкция по эксплуатации

Страница: 78 / 144

4-34
4 PROGRAM MODE
4
Press the [F1] key for the Setting Direction
Angle option.
5
a
Type in the occupied point number. The point
number can be alpha or numeric characters.
If the point number begins with an alpha
character, press the [F1] (ALPHA) key to
(NUM) prefix must appear on the display to
type in alpha characters. See Section 2.9
How to Enter Alpha and Numeric.
[F1]
Type
Point
Number
b
If the occupied point number is not stored in
memory, the display prompts for the
coordinate values.
Press the [F1] (INP) key to input the occupied
coordinates.
If zero is the desired value, press [F6] (OK).
If coordinate values other than zero are
desired, type the coordinates and press the
(ENT) ley to accept each value.
NOTE: The point number and coordinates
are not stored in memory after input.
[F1]
Type
Coord.
[F6]
6
a
The next display will prompt for the backsight
point number. The point number can be alpha
or numeric.
If the point number and its coordinates are
stored in memory, the display will advance to
step
7
.
If the point number and coordinates are not in
memory, follow step
6
b.
b
If the backsight point number is not stored in
memory, the display prompts for the
coordinate values. Type the coordinates and
press (ENT) to accept each value.
The program will continue to step
7
.
NOTE: To escape from this step, press [F1]
(EXIT) to return to step
4
.
The [F6] (BS) key moves the cursor to the left
to edit the previous character.
Type
BS.
Point
Number
LAYOUT
F1 Setting Direction Angle
F2 Setting Layout Point
F3 Coordinate data
F4 Options
Setting Occupied Station
PT#:
Alpha SPC <- ->
↑ ↓
Setting Direction Angle
BS:M-Point
N : 0.000
E : 0.000
INP OK
Setting Backsight Point
PT#:
Alpha SPC <- ->
↑ ↓
Setting Direction Angle
BS:T-Point
N:
E:
EXIT BS