Topcon GTS-600 Series, Инструкция по эксплуатации, Страница: 46 / 144

4-2
4 PROGRAM MODE
4.1 Setting a Direction Angle for Backsight Orientation
(Entering the instrument abd backsight coordinate values)
This program uses the input coordinate values of the occupied point, (instrument), and backsight point
to compute the backsight orientation direction angle.
The occupied coordinate input display appears as (BS:M-POINT). The backsight input display appears
as (BS:T-POINT). After the coordinate values are entered for both points, the instrument computes the
backsight direction angle for orientation. Only the occupied coordinate values are stored in memory if
the option is selected to (ON) in the Parameter Modes option. See Chapter 7 “PARAMETERS
SETTING MODE” . The program does not store the backsight coordinate values in memory.
Example: Backsight point A : N coordinate 54.321m, E coordinate 12.345m
Operating procedure Operation Display
1
Press [F1](BS) key.
Current data will be displayed. *1)
[F1]
2
Press [F6](OK) key.
3
Input N and E coordinate of backsight point A.
Example : N coordinate;54.321m
: E coordinate;12.345m
[F6]
N data
[ENT]
E data
[ENT]
4
Sight backsight point A.
5
Press [F5](YES) key.
The display returns to main menu.
*1)If you need to change the occupied point data, press [F1](INP) key and input new data.
N
Direction angle
Backsight point A
E
Instrument point C
Programs
F1 BS p 4/8
F2 STORE p
F3 REM p
F4 MLM p MORE
Setting Direction Angle
BS:M-POINT
N : 1234.567 m
E : 2345.678 m
INP OK
Setting Direction Angle
BS:T-POINT
N : 54.321 m
E : 12.345 m
EXIT BS
Setting Direction Angle
BS
HR : 320°10'20"
>
Set OK
?
EXIT YES NO
Complete