D4023-EN
TMR3610 Operators Manual
17
8.6 Setup Wireless Network Feeding Transfers Using WIFI
Step 1
There are multiple settings on the TMR3610 that are needed to enable the full
functionality of the module.
NOTE:
TMR3610 indicator software version must be
18AU24
or newer for WIFI Cab
Control. The CCT500 software version must be
GC109Iss1Rev19Feb 2 2018
or newer.
In the service menu the WIFI option must be activated to WIFION. This will activate the
device and allow a wireless device to connect to the indicator.
The connection to the farm network is required for wireless transfer of feeding
information to the indicator.
The menu item WIFINM (
D.A.N. 2801
) must be set to the access point name and menu
item WIFIPS (
D.A.N. 2802
) should contain the passphrase (password) to the customer’s
network if wireless security is enabled. Both settings must be set through the USB
transfer of settings. Enter
D.A.N. 8713
and press
, Yes is displayed. Press
to
download the settings to USB. Remove USB from indicator. Open file named
DS_MENU_SETTINGS.XML on USB, in a text editor (Note Pad or equal to) on PC.
Then modify the settings. Flow the steps below;
