Topcon 3D OCT-1, Руководство пользователя

Страница: 118 / 126

116
REFERENCE MATERIAL
3D Scan
Move on the inside of the square, which is composed of the given start point and end point, horizontally
and vertically by the step divided by the given resolution.
The scan for [3D Macula] and [3D Disc] is shown below. ("6.0×6.0mm" is initially set for the scan length
in both of these scans.)
The scan for [3D Macula (V)] and [3D Wide] is shown below. (As the scan length, "7.0×7.0mm" is fixed
for [3D Macula (V)] and "12.0×9.0mm" is fixed for [3D Wide].)
Radial Scan
In the scan range, perform scanning by the specified diameter and by the step divided by the given res-
olution. "6.0mm" is fixed for the scan length. The start point for Line-Scan and rotating direction are
reversed for each of right and left eyes. For the right eye, rotation is done counterclockwise in the hor-
izontal direction. For the left eye, rotation is done clockwise in the horizontal direction.
[3D-Scan]
End point
Live-Scan
position
Start point
End point
Start point
Live-Scan
position
Left eye Right eye
S S
I I
N N T T
Start point
End point
Live-Scan
position
Start point
End point
[3D-Scan](V)
Left eye Right eye
S S
I I
N N
T
T
Live-Scan
position
1
6
5
4
3
2
1
2
3
4
5
6
Left eye Right eye
S
I
N T
S
I
N T