Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
Make sure hinges are
mounted in the same line.
8
1mm
Aileron
Trailing
edge
Cut away the rubber tube when
the epoxy glue dried.
Make sure they are in
the right position while
installing.
Ball joint
Ball joint
Lock Nut (2mm )
Lock Nut (2mm )
Washer(2x5mm)
Washer(2x5mm)
Screw (2x10mm)
Screw (2x10mm)
4
Screw (3x5mm)
8
4
4
Screw (2x10mm)
Nut (2mm )
4
Washer(2x5mm)
Horn
4
Pivot & round hinge(5x68mm)
8
Washer(3x5mm)
Washer (3x6mm)
Screw (3x5mm)
L bracket
L bracket
Push rod
（
2mm)
8
Screw (3x10mm)
Install the L brackets to the servo of aileron as
illustration below.
Install the nylon control horn and connect the linkage.
Apply instand type AB glue to the holes in the aileron
and hinges.
Assemble the aileron to main wing with instant type AB glue. Be careful
to ensure the moving parts of the hinges are able to move freely.
Keep some space about 1mm width between the
trailing edge and the aileron.
2
Servo tray(68.5x56.5x2mm)
Pivot & round hinge(5x68mm)
8
4
Clevis
（
2mm)
4
4
Screw (2x10mm)
8
Screw (3x5mm)
Locknut (2mm )
2
Push rod
（
2mm)
4
Washer(2x5mm)
8
Horn
4
Pivot & round hinge(5x68mm)
4
8
Washer(3x6mm)
L bracket
Screw (3x10mm)
TP Screw (2.3x12mm)
8
1
2
3
4
5
1
Accessory list for the coming installation steps.
