TP Screw (2.3x12mm)
8
1.5mm
Masking tape
TP Screw (2.3x12mm)
8
TP Screw (3x12mm)
TP Screw (3x16mm)
1mm
Flap
Trailing
edge
Cut away the rubber tube when
the epoxy glue dried.
Make sure they are in
the right position while
installing.
Make sure hinges are
mounted in the same line.
8
Pivot & round hinge(5x68mm)
Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
2
Servo tray(68.5x56.5x2mm)
Pivot & round hinge(5x68mm)
8
4
Clevis
（
2mm)
4
4
Screw (2x10mm)
8
Screw (3x5mm)
Locknut (2mm )
2
Push rod
（
2mm)
4
Washer(2x5mm)
8
Horn
4
Pivot & round hinge(5x68mm)
4
8
Washer(3x6mm)
L bracket
Screw (3x10mm)
TP Screw (2.3x12mm)
8
Assemble the servo of the aileron to the wing with screws.
Assemble the servo tray to the wing with screws
and epoxy the fiber horn to the aileron.
Epoxy the pin hinges to the slots in the flap.
Epoxy the flaps to the wings as illustration.
Keep some space about 1mm width between
trailing edge and flap.
7
6
8
9
10
2
Accessory list for the coming installation steps.
