18
2.3. “
START/PAUSE
” key: When the treadmill is stopped, press the
START
key to turn on the treadmill. Press
“
START
” key when running, it will pause.
2.4. “
STOP
” key, when the treadmill is running, stop the treadmill slowly by pressing the
STOP
key one time.
2.5. “
Speed +
” key: In the condition of stopping or body fat testing, add the key for increasing parameters. In
running state, add the key for increasing speed.
2.6. “
Speed –
” key: In the condition of stopping or body fat testing, add the key for decreasing parameter. In the
running state, add the key for decreasing speed.
2.7. “
QUICK SPEED
” key: When the treadmill is running, speed up directly by pressing the quick speed key
4, 8,
12, 16.
2.8. “
I
” key: Increase the incline by pressing this key.
2.9. “
Incline –
” key: Decrease the incline by pressing this key.
2.10. “
QUICK INCLINE
”
key: In the running state, increase the incline directly by pressing the quick incline key
3,
6, 9, 12.
(
Ⅲ
). Conersion of public and British system
：
3.1. After pulling out the safety key, press the “
PROGRAM
” and “
MODE
” keys. The screen shows “
M
”changes
from kilometers to miles.
3.2. After pulling out the safety key, press the “
PROGRAM
” and “
MODE
” keys. The screen shows “
KM
”changes
from miles to kilometers.
(
Ⅳ
).Safety key function
：
Safety key is composed of a touch switch, a clothes clip and a nylon rope. It has the function of emergent
shutdown. In any state, pull-out safety locks, the treadmill and the keyboard of console stop, and the window
displays: “
E-07
” with sound. Then put well the safety lock, all show that the full light for 2 seconds, then go to the
system default state of work.
(
Ⅴ
).Guidance for safe usage
：
5.1. Put the power cord into the electrical outlet with 10A. Flip this switch to the “
ON
” position. The screen shines
with prompt sound and then identifies the safety key.
5.2. Put the safety key on the correct position and the clip on the chest. All show that the full light for 2 seconds,
and go to the default state of work: all the counter become zero and set value reset. The treadmill enters into
the P0 Normal Mode.
5.3. Press the “
PROG
” key to circularly choose a program
：
P0~P36
，
U1, U2, U3, FAT
;
a ) “
P 0
” user program. Press “
MODE
” key to cycle select 4 training modes. User can select the speed and
inclination. Speed default is 1.0km/h, and inclination default is 0%.
Training mode 1: Counting. Time, distance, calorie is plus. The select function is closed.
Training mode 2: Time Countdown. Under selecting, time window flickers, press “
+
” and “-” to modify the
value. The range is 5-99 minute. Default is 30:00.
Training mode 3: Calories Countdown. Under selecting, calories window flickers, press “
+
” and “-” to modify
the value. The range is 20-990CAL. Default is 50CAL.
Training mode
４
: Distance Countdown. Under selecting, Distance window flickers, press “
+
” and “-” to modify
the value. The range is 1.0-99.0km. Default is 1.0KM.
b)“
P1-P36
” Preset program. Only for Time Countdown mode. Under selecting, time window flickers, press “
+
” and
“-” to select. The range is 5-99 minute. Default is 30:00. Press “
MODE
” key to return to Defaults.
5.4. Press “
START
” key after setting up training mode. Screen displays 5 seconds into the countdown,
accompanied by five hint sound. After the countdown to 1, treadmill start gently; speed up slowly to the
display, then the constant speed operation smoothly.
