32
3. When not in use, slide the rotation direction selector (9) to the centre position to prevent accidental use (see fig. 6).
Abb. 6
b) Setting the operating mode
The torque selection ring (2) is used to set the operating mode and the torque.
When the device is used as a screwdriver, the torque selection ring (2) can be used to set the desired
torque (1–19) depending on the type of screw/material. The correct setting depends on the type of material
and the size of the screw. Position 1 denotes lowest setting and position 19 the highest setting.
When tightening screws, the final torque achieved should be always checked with a torque wrench.
1
Symbol
2
Operating mode
3
Application
(See fig. 7)
Drilling
Drill holes in metal, wood, etc.
1-19 (see fig. 8)
Screwing
Screw/unscrew screws
Abb. 7
Abb. 8
1-19
