VL 3001
English
www.toolland.eu
23
DESCRIPTION
1. Log pusher
2. Work table
3. Wedge
4. Lift handle
5. Support Leg
6. Log retaining plates
7. Switch
8. Motor
9. Push button box
10. Wheels
11. Hydraulic control lever
12. Control lever Guard
13. Bleed Screw
14. Oil drain bolt w/dipstick
SAFETY INSTRUCTIONS
Keep work area clean. Cluttered areas
and benches invite injuries.
Consider work area environment. Do not
expose power tools to rain. Do not use
power tools in damp or wet locations.
Keep work area well lit. Do not use power
tools near flammable liquids of gases.
Guard against electric shock. Prevent
body contact with grounded surfaces
(e.g. pipes, radiators, ranges,
refrigerators, etc).
Keep children away. Do not let visitors
contact tool or extension cord. All visitors
should be kept away from work area.
Store idle tools. When not in use, tools
should be stored in a dry, high or locked-
up place, out of reach of children.
Do not force tool. It will do a better job
and operate more safely at the rate for
which it was intended.
Use right tool. Do not force small tools or
attachments to do the job of a heavy
duty tool. Do not use tools for another
than their intended purpose; for example
do not use a circular saw for cutting tree
limbs or logs.
Dress properly. Do not wear loose
clothing or jewelry. They can be caught in
moving parts. Rubber gloves and non-
skid footwear are recommended when
working outdoors. Wear protective hair
covering to contain long hair.
Use safety glasses. Also use dust mask
during pulverulent operations and wear
ear protection. If the noise level exceeds
85 dB(A), ear protection is obligatory.
Indicated noise levels may be exceeded
dependent on the working environment
and the material to be treated.
Use dust extraction. If dust extraction
and collection devices are present on the
tool, make sure that they will be used
properly.
Do not abuse the supply cord. Never
carry tool by cord or yank it to disconnect
it from wall outlet. Keep the cord from
heat, oil and sharp edges.
Secure work. Use clamps or a vise to hold
the work piece. It is safer and it frees
both hands to operate tool.
Do not overreach. Keep proper footing
and balance at all times.
Maintain tools with care. Keep tools sharp
and clean for better and safer
performance. Follow instructions for
lubricating and changing accessories.
Inspect tool cords periodically and, if
damaged, have them repaired by an
authorized service facility. Inspect
extension cord periodically and replace if
damaged. Keep handles dry, clean and
free from oil and grease.
Disconnect tools. When not in use, before
servicing, and when changing accessories
such as blades, bits and cutters.
Remover adjusting keys and wrenches.
Form the habit of checking to see that
key and adjusting wrenches are removed
from the tool before switching it on.
Avoid unintentional starting. Do not carry
plugged-in tool with finger on the switch.
Be sure that the tool is switched off
before plugging in.
Outdoor use extension cords. When tool
is used outdoors, use only extension
cords intended for use outdoors and so
marked.
Stay alert. Watch what you are doing.
Use common sense. Do not operate tool
when you are tired.
Check damaged parts. Before further use
of the tool, a guard or other part that is
damaged should be carefully checked to
determine that it will operate properly
and perform its intended function. Check
for alignment of moving parts, binding of
moving parts, breakage of parts,
mounting and any other conditions that
may affect its operation. A guard or other
