TH2523 Series Operation Manual
Ver1.2
22
corresponding soft key to confirm. When the primary measurement result is larger
than the datum set in A Stop1 or less than the datum set in A Stop 2, the instrument
will automatically stop testing. For the accuracy of measurement result, two more
measurements will be done when the instrument finds the measurement result
exceeding its range, and then TH2523 will stop testing.
B Stop1/B Stop2
：
Move the cursor to it and input the maximum and minimum ranges
of the secondary parameter through the numerical keyboard and press the
corresponding soft key to confirm. When the secondary measurement result is larger
than the datum set in B Stop1 or less than the datum set in B Stop 2, the instrument
will automatically stop testing. For the accuracy of measurement result, two more
measurements will be done when the instrument finds the measurement result
exceeding its range, and then TH2523 will stop testing.
CLEAR:
Press it in soft key area and the setup data on where the cursor is located
can be cleared.
CLEAR LINE:
Press it in soft key area and the line setup data in which the cursor
is positioned can be cleared.
3.7
<STATIS DISP>
Press [DISP] and then choose STAT DISP to enter into the <STAT DISP> page shown as
below figure 3-8.
