TH2523 Series Operation Manual
Ver1.2
5
Press [SETUP] to enter into the MEAS SETUP page.
(4)
Universal Arrow Keys
There are four arrow keys: up, down, left and right arrow keys.
(5)
Numeric Key
This key is used to input the figure.
(6)
LOCK Key
Press this key to lock the screen and press it again to unlock the screen.
(7) COPY Key
Press this key to save the current screen shot to U-disk.
(8) PASS/FAIL Display
The compare results will be displayed through PASS/FAIL .
(9) USB Interface
USB HOST Interface
(10) RESET Key
System reset key.
(11) TRIG Key
In MAN (manual) mode, pressing this key can trigger the instrument manually.
(12) Test Terminal
（
INPUT
）
4-terminal test terminal is used to measure DUT by a 4-terminal test cable.
(13)
LCD screen
480×272 dot-matrix LCD display
(14)
Soft key area
When the cursor stays in different area, the soft key area will display different function.
(15) POWER
Power switch.
2.2
Introduction to Rear Panel
Figure 2-2 shows the rear panel of TH2523.
