Connecting to power
11
EN
Connecting to
power
Connect TomTom LINK 300 to the vehicle
power supply with the standard vehicle
voltage (12 V / 24 V). Do not connect to a
voltage converter. The three wires GND, IGN
and PWR+ (supply voltage) must be
connected.
1. Connect the GND wire (brown) to ground
(clamp 31).
2. Fuse the PWR+ wire (red) and the IGN wire
(black) with one 2 A / fast blow fuse
(
Technical data
on page 24) each.
3. Connect the fused PWR+ wire (red) to the
carry current (clamp 30).
4. Then connect the fused IGN wire (black) to
ignition (clamp 15).
5. If you do not want to record digital inputs,
then connect the IN1 wire (green/blue) to
GND. If you want to record a digital input,
connect the IN1 wire (green/blue) to a 2 A /
fast blow fuse (
Technical data
on page 24),
then connect the fuse to a switch which is
connected to the power supply. For further
details see www.tomtomwork.com/in1.
6. Insert the 4-pin plug into the power cable
connector.
Содержание LINK 3000
Страница 1: ...Installation Guide LINK 300 ...
Страница 2: ...Tom Tom LINK In stalla tion Guide ...
Страница 8: ...EN Proper Installation 9 Non hidden Hidden ...