Toledo ZT-1, Руководство пользователя

Страница: 25 / 36

ZT-1 User’s Manual – Operation
DOC #18172 Page 25

Calibration
Refer to the Calibration Data Report issued for each model and serial number load
cell. Load cells and data reports are identified by model number, serial number
and date of calibration.
Pre-calibrated systems . When installing, be sure to match up the specific
load cell model number and serial number to the specified ZT1 serial number
indicated on corresponding calibration data report.
Pre-calibrated systems should not need adjustments made to the ZT1.
In the case where the system was not pre-calibrated or needs calibration,
follow procedure below.
Refer to the diagram below for control locations.