Tofino Security TofinoXe-0200M2M2, Руководство по установке оборудования

Страница: 37 / 54

Tofino Xenon Security Appliance Tofino SA
Release 04 05/2015
37
The SAVE/LOAD LED will illuminate in green. After a few seconds the
MODE, SAVE/LOAD, and RESET LEDs will flash in green in a left to
right sequence to indicate the USB Save is in progress.

When the flashing sequence stops, remove the USB storage device.
If the save was successful the LEDs will revert to the state they were
in prior to the save action.

USB Load
Perform a USB Load to transfer configuration files and firmware updates
stored on a USB storage device to the Tofino SA.

Power on the Tofino SA for at least one minute.

Insert the USB storage device containing the prepared files into the
USB port.

Press the Save/Load/Reset button twice.
The SAVE/LOAD LED will illuminate in yellow. After a few seconds the
MODE, SAVE/LOAD, and RESET LEDs will flash in yellow in a right to
left sequence to indicate the USB Load is in progress.

When the flashing sequence stops, remove the USB storage device.
If the load was successful the FAULT LED will be off.