Tofino Security TofinoXe-0200M2M2, Руководство по установке оборудования

Страница: 32 / 54

32
Tofino Xenon Security Appliance Tofino SA
Release 04 05/2015
2.4 Connecting the terminal blocks
2.4.1 Connecting the power supply and signal lines

Supply voltage
The supply voltage can be connected redundantly. Both inputs are uncou-
pled. There is no distributed load. With redundant supply, the power
supply unit with the higher output voltage supplies the device on its own.
The supply voltage is electrically isolated from the housing.
WARNING
ELECTRIC SHOCK
Never insert pointed objects (narrow screwdrivers, wires, etc.) into the
device or into the connection terminals for electric conductors. Do not touch
the connection terminals.
Start connecting the electrical wires only if
all the above safety require-
ments are fulfilled.
See “Supply voltage” on page 6.
See “Input/output interfaces” on page 7.
Failure to follow these instructions can result in death, serious injury,
or equipment damage.
1 Power supply connection 1
1a
24 V
1b 0 V
2 Connection for the signal contact
3 Power supply connection 2
3a
0 V
3b 24 V
Table 9: Pin assignment: 6 pin, screwable terminal block (on the top), connection
to the device (at the bottom)
1a 1b 2 2 3a 3b