■
B R E A D S
We suggest starting your bread baking with this White Bread Recipe. Follow each step carefully. These
steps, a summary of previous pages, have been written to eliminate the most common errors in bread
maker baking and may be helpful for any recipe .
19
WHITE BREAD
1 LB
1.5 LB
2 LB
water 80°F/27°C
3/4 cup + 1 T B L
1 cup
1 1/2 cups
o i l
1 T B L
2 T B L
2 T B L
s u g a r
1 1/2 T B L
2 T B L
1/4 cup
s a l t
1 tsp
1 1/4 tsp
2 tsp
d ry milk
1 T B L
1 1/2 T B L
2 T B L
bread flour
2 1/4 cups
3 cups
4 cups
a c t i ve dry ye a s t
1 1/4 tsp
2 tsp
2 1/4 tsp
BASIC COURSE
1
1
1
BASIC RAPID 2 Ye a s t :
2 1/4 tsp
3 tsp
3 1/4 tsp
Method
1.
Remove the bread pan from the bread maker. Attach the kneading blade onto the shaft. Make sure
all ingredients, except water, are at room temperature.
2.
Use a liquid measuring cup to measure the water (80°F/27°C) and pour into the bread pan.
3.
Use a measuring spoon to measure the oil and add to the bread pan.
4.
Use a measuring spoon to measure the sugar, salt and dry milk; level off with the straight edge of
a knife and add to the bread pan.
5.
Lightly spoon bread flour into a dry measuring cup, level off with the straight edge of a knife and
add to the bread pan. Smooth into all corners. Lightly tap pan on counter 3 times to settle all dry
ingredients.
6.
Carefully measure yeast with a measuring spoon; level off with the straight edge of a knife and a d d
to the bread pan. If using delay timer, make sure yeast is on top of bread flour, away from liquids.
7.
Place the bread pan into the bread make r, push down on rim until it snaps into place. Close the lid.
8.
Select BASIC COURSE #1, LOAF siz e, desired CRUST color, and set TIME to delay, or press
START for immediate start.
9.
At the beep during the kneading process, check the dough ball. It should be slightly tacky to the
touch. At this time, push down any dough or flour that may be on the sides of the pan.
10.
When the beeper sounds, the bread has finished baking and the one hour KEEP WARM process
will start.
11.
Use oven mitts to carefully remove the bread pan at any time during the KEEP WARM process.
C AU T I O N : THE OVEN CAV I T Y, BREAD PAN, KNEADING BLADE AND BREAD WILL BE V E RY HOT.
USE OVEN MITTS.
12.
Turn bread pan upside down and shake several times to release the bread. Do not use metal uten-
sils inside the bread pan or bread maker. Remove the kneading blade and allow loaf to cool stand-
ing upright on wire rack approximately 20 minutes before cutting.
13.
When the bread has completely cooled, approximately one hour, store in an air tight container.
14.
UNPLUG UNIT BEFORE CLEANING. Clean bread pan after each use, DO NOT IMMERSE THE
BREAD PAN IN WATER.(See CLEANING & STORING.) Clean inside of bread maker after each use.
Содержание Bread Box Plus 1145
Страница 63: ...63...