7-13 PAGING ZONE (FUNCTION CODE 70)
ESTABLISHMENT OF EACH PAGING ZONE
Step 1
Touch
Function Code
Touch
Paging Zone No.
(00~21, 00~45)
1st Station No.
of the Zone
Last Station No.
of the Zone
Paging Zone No.
(00~21, 00~45)
1st Station No.
of the Zone
Last Station No.
of the Zone
Touch
Confirmation tone
NO
New Registration finished?
YES
Return
NOTES
1. To release at one time the data programmed into all the
Zones for this function.
Touch
(Confirmation tone
will be heard.)
2. Re-start at Step 1 when mis-dialing occurs.
(All other registrations remain valid.)
3. Switch B-4 must be "ON" to employ this function.
4. In the case "Paging Response Without Zone Number" mode
is selected by the DIP Switch SW-C-2 this
registration is essential.
5. Zone number series of each exchange in Tie-line system.
Model
Type of
exchange
EX-610/620
Exchange "A"
No. 01~07
Exchange "B"
Exchange "C"
No. 08~14
No. 15~21
EX-610/620
(tie-lined to
EX-630)
EX-630
No. 01~07
No. 01~15
No. 16~22
No. 16~30
No. 31~37
No. 31~45
—34—
