TNI softFlow, Инструкция по эксплуатации

Страница: 17 / 48

17
Instructions for Use
TNI soft Flow
Instructions for Use
TNI soft Flow
2.2.1 Applicator installation (softFlow accessories)
Choose appropriate applicator type (see chapter
System components).
Insert the applicator plug from above into the dedi-
cated socket and push it down gently and fully.
NOTE
• To meet the requirements of the ongoing therapy, be sure to choose the appropriate applica-
tor type (see chapter System components: accessories softFlow Mode).
2.2 Applicators
NOTE
• To meet the requirements of the ongoing therapy, be sure to choose the appropriate applica-
tor type. Choose an applicator type whose cannulas do not close the nostrils completely.
• Keep the heated applicator tube away from any electronic monitoring electrode (EEG, ECG,
EMG, etc.) to avoid potential interference with the monitored signal.
• Do not jam or bend the tube.
• The applicator must be changed with every patient or by the end of the life cycle hours (whi-
chever occurs fi rst).
WARNING
To avoid the risk of injuries and damage:
• Do not use accessories that are not authorized by TNI medical AG.
• Do not use insulating sleeves and do not cover the applicator when in use (e.g. by a blanket).
• Do not use any external source (a radiant heater, e.g.) to heat the applicator.
• Do not modify the applicator in any way.
• Do not use the applicator if you see any foreign object in the applicator.
To avoid the risk of electric shocks:
• After the applicator has been attached, the patient should not touch the electrical connec-
tions of the TNI softFlow system.
1 2