REFA FAMILY USER MANUAL
Page
16
of
27
Powering the Refa
4.2
The Refa is powered using the mains power supply.
Mains power supply
Mains Power Cable
Check that the power supply is labelled as
‘SUP3’ or ‘CSUPEMCA’.
NOTE: a Refa Extended requires a
CSUPEMCA power supply.
Connect the mains cable to the power supply
and the other side into a well-grounded
power outlet.
On the SUP3 power supply a green LED on
the power supply will light up green.
On the CSUPEMCA power supply you also
have to switch on the power supply.
Position the power supply such that it is easy
to disconnect the power supply from the
mains.
Connect power cable to Power Connector on the Refa
Connect the power supply cable to the power
supply socket on the back of the device.
Make sure the notch of the connector is at
the top of the connection, turn the connector
part to position the notch correctly.
Flip the power switch
Switch on the Refa by flipping the switch
from ‘O’ to ‘I’. On the front panel all LEDs
will light up shortly. The Power LED on the
front panel will turn green.
