REFA FAMILY USER MANUAL
Page
10
of
27
Intended use
3.2
The product is intended to be used for research purposes for acquisition of
(electro)-physiological signals by, or under supervision of, a researcher. The user
must have knowledge of current good practice in physiological measurement in
science.
Electrophysiological signals (e.g. EEG, EMG or ECG) are measured via the
unipolar or bipolar inputs on the device via electrode leads connected to a subject.
Other physiological parameters, such as respiration, body position, body
movement and temperature are measured using the auxiliary input channels.
These types of signals require additional sensor interface modules.
Important
The system does
not
perform any signal interpretation or
signal analysis. This is left to the researcher.
The system is
not
intended for use in a life supporting
system.
For measurements the device transfers the data to the PC by means of a glass
fiber connection, where the signals can be viewed or stored for further processing.
The device is powered by a power supply.
