32-76-00-0002
9
Rev. 6/06/18
Level
–
located on the top of the upright of the unit, the level is used to ensure the front and rear feet of
the machine are aligned properly on the table or benchtop.
Leveling Pads
–
four feet located on the bottom of the unit, used in conjunction with the level to align
the tester on the table or benchtop.
Load Cell
–
a measuring device used to determine the force required to move the sample and sled.
USB Connector
–
output port to a USB receipt printer or thumb drive
RS-232 Connector
–
RS232 output via Mini USB connection
Power Supply Connector
–
connects power supply to tester.
Power Supply
–
an AC adapter whose input is an AC outlet and outputs to the power supply connector
on the rear of the unit.
NOTE:
You should only use a power supply provided by TMI specifically for your instrument.
The supply tested for this application is the Mean Well GST60A24-P1J (60W, 24V, 2.5A).
Your instrument may require that the supply be modified for fit; contact TMI for details.
10
SET-UP
MACHINE
1.
Place the tester in an environment that is free from shock and vibration, on a flat level surface that
is strong enough to support the load of the tester. Use the four adjustable legs on the tester and
turn them until level.
2.
Plug power source into a filtered or clean AC outlet.
Coefficient of Friction - Peel Tester-10262018-ab5700-m44.pdf 9
Coefficient of Friction - Peel Tester-10262018-ab5700-m44.pdf 9
15-6-2020 13:40:51
15-6-2020 13:40:51
