TMG TMG-AB72, Руководство по эксплуатации продукта

Страница: 12 / 26

W W W . T M G I N D U S T R I A L . C O M P 1 1 / 2 5 T o l l F r e e : 1 - 8 7 7 - 7 6 1 - 2 8 1 9
* ATTACHING TO SKID STEER LOADER
：
1. Check for and remove any debris in the hitch point areas before attaching to Angle broom to skid
steer loader.
Read the skid steer operator's manual connecting and removing instructions.
Position hydraulic hoses so they will not be pinched when connecting the angle broom.
The skid steer lock handles should be in the unlocked position and the lock pins retracted.
2. Drive skid steer loader slowly to the Angle broom and carefully align the skid steer to the angle
broom, making sure hitch plate on the skid steer loader is parallel with the Angle broom’s top angle
bars.
3. Rotate top of skid steer loader tilt arms slightly forward.
4. Position top of skid steer loader hitch plate under the top angled bars and slowly raise loader
hitch plate up until hitch plate is seated under the top angle bars (attachment flange). Lower skid
steer lift arms to their lowest position
LOCK HANDLES.
REFER TO THE
MANUAL OF SKID
STEER LOADER.
LOCK PIN OF
SKID STEERS
MOUTING HITCH PLATE