Page
6
of
17
Mark the ground in the final building location with a line showing the positions of
base plates, front, and rear doors. All lines should be drawn from center to center
of all baseplate tubes. Diagonal line X must be equal to Y.
Baseplates : all baseplates must be installed firmly with expansion bolts (#16) on
this step (Picture 1).
Parts used in this step :
-
(4) Baseplates (#5L, #5R)
-
(16) Baseplates (#7)
-
(2) Baseplates (#6)
-
(68) Expansion bolts M12 (#16)
-
(2) Baseplates (6A)
Picture 1
Step 2 : Assemble all trusses
The building includes 10 trusses : (1) front truss, (1) rear truss, and (8) middle
trusses. The front and the rear truss are to install with the fabric panel (#23
and #23A).
Parts used to install the front truss in this step (refer to Picture 2) :
-
(1) Peak arch tube (#1)
-
(2) Upper rafter tube (#2A)
-
(2) Shoulder tube (#3A)
-
(2) Sidewall tube (#4A)
-
(1) Two wheel rope pulley (#11A)
-
(1) One wheel rope pulley (#11B)
-
(12) Half round head bolt (#18)
-
(2) Hex bolt (#19A)
Содержание TMG-184517ST
Страница 1: ...Page 0 of 17 Main Specifications...
