Wireless NVR Kit Manual
16
and to achieve cable transmission.
Fast adding method: the main menu (right click the mouse) -> video management -> Fast adding
Through the network cable to connect NVR and IPC, click search, video management interface will show
the information that the NVR normally communicated with IPC. Click on fast adding, the system will
automatically add the IPC which can work properly in idle channel, the monitor will display the IPC video
signal. When working, can not unplug the cable. If the four channels are idle, using four cable connected to
the four IPC, after fast adding, the monitor will display IPC video signal.
Explanation
Using fast adding function, the system will search all devices within the LAN and support automatic
allocation of IP addresses.
4.3.3 Advanced setups
Function setup
：
Support multi-network segment search, allowing repeated adding, smart adding.
Steps
：
Right-click the system main interface, in the pop-up right-click menu, select "Video Management". In
the open video management interface, click Advanced Setups, as shown below:
Explanation
Use supporting multi-segment search function, the system can search the camera which do not in the
same network segment with NVR.
Using the Allowing Duplicate Add feature, the system will allow you to repeat adding the same camera
to multiple channels.
With the Intelligent Addition feature, when the system detects the IP address of the ip camera is
abnormal(including IP conflicts or IPC is not in the same network segment as the NVR),it will allocate a
new legal IP address to the IP camera.
4.3.4 Delete device
Function explanation
：
Used to delete an added device.
Steps
：
