Wireless NVR Kit Manual
15
4.3.2 Add device
Function instructions
：
Used to add the searched IPC device.
Operation steps
：
1. Code matching instructions
：
Here is a video link about how to match code:
https://youtu.be/F2Nr__dSewA
The code matching is mainly for matching NVR with IPC and sending NVR WiFi account name and
password to the IPC, so that IPC automatically connected with NVR. Through the wireless way to do the
video transmission, before the code matching, please remove the bad channel first; (the IPC in the kit do
not need this operation, when needing to connect the new IPC or after NVR ESSID and password
modification will need this operation)
2: Code matching methods
：
First connect the wireless camera to any LAN port of the NVR with the network cable in the accessory box
and the method to code matching interface is: main menu (right lick the mouse) -> video management ->
code match. In the pop-up whether to do the code matching interface click on the "yes" to do the code
matching operation. Then please be patient waiting for the code results;If the code matching fails, please
click "Refresh". If no device is indicated then it means the network cable is poor contact. Please
re-connect to do the code matching operation.
3: Fast adding
：
After the fast adding, the camera and NVR must be connected through the network cable to see the image
