Wireless NVR Kit Manual
11
Before starting up, make sure that the display or monitor is connected to the video output of the device.
Specific starting up steps are as follows:
1, Plug in the power, the front panel power indicator is red.
2, Turn on the rear panel power switch or tap the front panel power "On" key. The device
starts to start, as shown in the following figure:
4.1.2 Login
When the system is powered on and started, after waiting for the system to initialize, the system will
automatically pop up the login interface. As shown below. The user needs to complete the login before
proceeding.
Steps
：
1
，
Using the left mouse button click the user name edit box, and enter the local login user name, the default
factory settings for the user name is admin.
2
，
Using the left mouse button click the password edit box, and enter the local login password, the default
factory settings password is empty, that mean do not need filled out.
3
，
Using the left mouse button to click "OK" to complete the login.
Explanation
Password can be composed of numbers, characters, operators and points, *, #, the length can not
exceed 10 characters.
