TM RACING 250 EN, Руководство по ремонту

Страница: 58 / 72

54
7
2
8 7
16
2
17
3
1
15
9
14
ENGINE DISASSEMBLY
Reassemble the countershaft gear (1) by matching the timing point (14) of
the countershaft gear with the timing point (15) of the crankshaft gear and
put Loctite 243 on the oven (16) and not on the screw.
Tighten the screw (9) with a torque of 22 Nm (2,2 kgm, 16,22 ft/lb) + loctite
243.
Put graphite grease on the bronze bush (17) and reassemble the gear (2).
Refit the washer (8) and the screw (7), put loctite 243 on the thread of the
screw (7).
Tighten the screw (7) with a torque of 10 Nm (1 kgm, 7,37 ft/lb).
Reassemble the gear (3) of the pedal start as described in the relative par -
agraph.