TM RACING 250 EN, Руководство по ремонту

Страница: 52 / 72

48
1/4
1/4
2
4
3
4
3
5
7
9
6
8
10
1
11
12
1
1
2
2
2
13
9
5
ENGINE DISASSEMBLY
2.18 IDLE KICK STARTER REMOVAL (ONLY K.S.)
remove the transmission cover and the clutch bell as described in the
relative paragraphs.
Release the spring (1) from the relative housing, turn the starter (2) anti-
clockwise by 1/4 of a turn.
remove the starter (2) complete with spring (3) and washer (4).
2.18.1 Starter dismantling
In sequence, remove the washer (4), spring (3), socket and ratchets (5),
the seeger (6), shim (7), gear (8), shaft (9), socket (10) and the spring (1).
Re-assemble in reverse order to dismantling, paying attention to positioning
the pin (11) of the spring (1) in the relative hole (12) on the shaft (9).
Time the ring nut (5) with the shaft (9) using the refer -
ence bolts (13).
2.18.2 Re-moun ting
Re-mount the idle kick start in the relative housing and then turn the
starter (2) clockwise by 1/4 of a turn and insert the pin (1) in the hole in
the guard.
NOTE: Lubricate the fitting hole abundantly with graphite grease.