6. Battery Pack Instructions
072-65284M-02 (SonicMan SN1) 24 Feb 2005
13
6 Battery Pack Instructions
6.1
Charging the Battery Pack
1) Connect the power cord for the included charger
c
.
2) Insert the battery pack securely into the charger
d
.
3) The red “charging” indicator light comes on and the charger automatically begins
charging
e
.
4) Pushing the white button causes the battery pack to be discharged (green light)
before charging. Charging (red light) begins automatically after discharging is
completed.
5) To stop the discharging process (green light) before it is completed, press the white
button again. Discharging ceases (the green discharge light goes out), and charging
(red light) automatically begins.
6) When charging is fully completed, the red “charging” indicator light begins blinking on
and off.
6.2
Inserting and Removing the Battery Pack
1) Slide back the latch
c
and open the
SonicMan
battery cover
d
.
2) Insert the battery pack with the end on which the contacts are located going in first
e
.
3) Close the battery cover
f
and slide the latch to fasten the cover in place
g
.
4) When the battery pack is inserted, the power on the
SonicMan
may automatically
turn ON. If this occurs, double-click the trigger to turn the power OFF.
5) Remove the battery pack by following the above steps, except remove the battery
pack in step 2 instead or inserting it.
c
d
e
c
d
e
f
g
