TLV J3X Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 24

background image

172-65132MA-07 (JX Series) 16 Feb 2022

1

Contents

Introduction ........................................................................ 1

Safety Considerations ........................................................ 2

Checking the Piping ........................................................... 4

Operation ........................................................................... 5

Specifications ..................................................................... 6

Configuration ...................................................................... 7

Installation .......................................................................... 9

Maintenance ..................................................................... 10

Operating the Optional Lock Release Valve .................... 11

Disassembly/Reassembly ................................................ 13

Troubleshooting ............................................................... 19

TLV EXPRESS LIMITED WARRANTY ............................ 20

Service ............................................................................. 22

Option: Pressure-balancing Line Connection (no X-element)
......................................................................................... 23

Introduction

Thank you for purchasing the TLV free float steam trap.

This product has been thoroughly inspected before being shipped from the factory.
When the product is delivered, before doing anything else, check the specifications and
external appearance to make sure nothing is out of the ordinary. Also be sure to read
this manual carefully before use and follow the instructions to be sure of using the
product properly.

This free float steam trap is of a revolutionary design that employs a high-performance
X-element in its air vent. It is best suited for steam equipment use.

The X-element is very sensitive to changes in temperature, and responds with great
accuracy, allowing for the quick discharge of large quantities of initial air and cold
condensate immediately after operation start-up. It also reacts with great sensitivity to
the inflow of large quantities of condensate and hot air during operation, preventing air
binding.

This steam trap, which combines the superior features of the X-element with the proven
performance record of the free float, increases heating efficiency and reduces
manpower requirements for maintenance and bypass blowdown.

If detailed instructions for special order specifications or options not contained in this
manual are required, please contact TLV for full details.

This instruction manual is intended for use with the model(s) listed on the front cover. It
is necessary not only for installation, but for subsequent maintenance,
disassembly/reassembly and troubleshooting. Please keep it in a safe place for future
reference.

«
1
2
3
4
...
»

Содержание J3X

























Отзывы:

Нет отзывов

Похожие инструкции для J3X

Бренд: i-SENS Страницы: 52

Бренд: Acorn Страницы: 31

Canicom 200 First

Бренд: Num'axes Страницы: 5

Бренд: Hans Grohe Страницы: 40

Бренд: Numaxes Страницы: 43

Бренд: Calflex Страницы: 24

HANDHELD DUMMY LAUNCHER

Бренд: Sporting Saint Страницы: 2

Бренд: Zehnder Pumpen Страницы: 40

Urquiola 11443007

Бренд: Axor Страницы: 20

Бренд: INVISIBLE FENCE Страницы: 16

Metris 31471000

Бренд: Hans Grohe Страницы: 24

Refinia K-T5324

Бренд: Kohler Страницы: 20

C 04218 0 Series

Бренд: Hans Grohe Страницы: 16

PuraVida 15072000

Бренд: Hans Grohe Страницы: 40

C 042200 Series

Бренд: Hans Grohe Страницы: 76

C 04219 0 Series

Бренд: Hans Grohe Страницы: 12

Бренд: Sanela Страницы: 5

Бренд: Danze Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды