TLV J3X, Инструкция по эксплуатации

Страница: 16 / 24

172-65132MA-07 (JX Series) 16 Feb 2022
15
Removing/Reassembling Components Inside the Cover
Part
J(F)3X
J(F)5X
J7.2X
J7X
J7.5X
J8X
During Disassembly During Reassembly
Snap Ring
18
(X-element
Cover 17)
–  
Pinch the insides
together and remove Insert securely into the snap ring
groove in the cover
X-element
Cover 17
–  

Make sure the mesh side is facing
the float
Spring Clip
16
(X-element
14)
  
Pinch the insides
together and remove
from the X-element
guide Insert securely into the slot in the
X-element guide
X-element
14
  
Remove from the
X-element guide Make sure the correct side of the
X-element is facing up
Air Vent
Valve Seat
21
  
Remove with a socket
wrench Coat threads with anti-seize;
consult the table of tightening
torques and tighten to the proper
torque
X-element
Guide 15
  
Remove without
bending Fix with the Air Vent Valve and
make sure the X-element can be
inserted smoothly
Figure C
Removing/Reassembling Components Inside the Body
Configuration of screen components differs according to the model.
Part
J(F)3X
J(F)5X
J7.2X
J7X
J7.5X
J8X
During Disassembly During Reassembly
Snap Ring
18
(Screen 9)
– –

Pinch the insides
together and remove Insert securely into the snap ring
groove
Screen 9
(Float
Cover 12)
 – –
Remove by lifting
straight up and out
while turning Align the arrow on the screen (float
cover) with the arrow on the body
and insert, fitting the tab on the
bottom of the screen (float cover)
into the guide in the body and
making sure the top of the screen
(float cover) does not stick up out
of the body (Figure D)
Screen 9
–  –
Lift straight up and out Place on the screen holder, making
sure that the top of the screen does
not stick up out of the body
– – 
Lift straight up and out Place on the screen holder
retainer, making sure the rounded
side is on top
Continued on the next page