Page 1-1
TL-3524 USER`S MANUAL
Rev. B
P/N 03-3524-2003
1. GENERAL DESCRIPTION
1.1. INTRODUCTION
This manual describes the physical, mechanical and electrical features and functions of the TL-3524
Altimeter.
1.2. INSTRUMENT DESCRIPTION
The Altimeter incorporates the new generation of a precise sensor with the temperature and altitude
calibration, which enables measuring the altitude immediately after turning the instrument on, without having
to wait a few minutes. Another part of the Altimeter is an encoder of the altitude for any transponder, see
the table, page 8-1.
The TL-3524 incorporates a 10.000 line long-term memory and SchecK memory (see page 7-1) for
storing the measured values at 0.1 to 60 second sample rate.
The TL-3524 enables the pilot to keep the set altitude. In case of exceeding the set altitude, the pilot will
be warned by the acoustic or visual signalization. It is also possible to set the MDA, the approach altitude
and the transition altitude. When reaching the transition altitude, a message will show on the display.
If the alarm warning has be activated either by the lack of oxygen or by high altitude, the instrument will
display a Service message after the next turn-on to inform the user that the altitude has been exceeded.
The User button can be programmed in the main set-up for the quick display of the maximum reached
altitude or for the display of the currently set barometric pressure.
It is possible to download the measured values from the instrument via the serial cable RS-232c into your
PC.
1.3. TECHNICAL SPECIFICATIONS
The producer guarantees all stated technical parameters only when the instrument is installed by an
authorized service or an aircraft manufacturer.
1.3.1 Physical characteristics
Width
71mm (3.346 inches)
Height
67mm (3.346 inches)
Depth
92mm (3.6220 inches) including connectors with cover
Panel hole
57mm (3.149 inches) diameter
TL-3524 Weight
0.30 kg (0.66 lbs)
TL-3524 Harness
0.05 kg (0.11 lbs)
