Page 5-1
TL-3524 USER`S MANUAL
Rev. B
P/N 03-3524-2003
5.2 Main Set-up Functions Description
Table of the instrument configuration steps is shown below (Initial - firmware version 1.0).
0
LANGUAGE
Select your language for communication with the instrument.
1
DISPLAY CONTRAST
Select the contrast of the display.
2
PASSWORD
Select your password.
3
ALTITUDE UNIT
Select your local unit for altitude.
4
AIR PRESSURE UNIT
Select your local unit for barometric pressure.
5
DISP. PRECISION
Set the resolution of altitude that will show on the display.
6
CALIBRATION
Do the calibration of altitude acc. to FAR 91.36, 91.172
FAA advisory circular 43-6A.
7
TRANSITION ALT.
Set your local transition altitude.
8
STROBE MODE
Enable or disable the strobe signal to the transponder.
9
OXYGEN WARNING
Select
OFF
= if your cockpit is pressurized,
ON
= if your cockpit is not pressurized.
10
USER BUTTON
Program your button for these functions:
SHOW MAX. ALT
= shows the maximum altitude
of acceleration when the button is pressed,
SHOW QNH or FL
= shows the set barometric pressure
when the button is pressed.
11
VOICE WARNING
Enable or disable the voice warning into the headphones
(only with use of our Intercom TL-2424 or Voice Module).
12
INST. ON-LINE
Check the connected instruments from the TL elektronic
iFamily® that are On-Line.
All information on this page is subject to change without prior notice. Download the latest
version of the manual from www.tl-elektronic.com and compare with you version of firmware.
