Page 5-4
TL-3524 USER`S MANUAL
Rev. B
P/N 03-3524-2003
5.10 Strobe Signal of Transponder
Some transponders have the strobe signal that activates or
deactivates the outputs of the TL-3524. If the pin no.3 on the
connector P3524 is plugged in, select „ENABLE“. If the pin
no.3 is not plugged in, select „DISABLE“.
CONTINUE
CONTINUE
...............
...............
INST. ON-LINE
elektronic
GPRS MODULE
VOICE MODULE
BROWSE
ALTITUDE
encoder
ALTITUDE
encoder
CONTINUE
CONTINUE
...........
...........
ENCODER STROBE
SELECT
elektronic
DISABLE
ENABLE
CONTINUE
CONTINUE
.........
.........
OXYGEN WARNING
SELECT
elektronic
DISABLE
ENABLE
ALTITUDE
encoder
5.11 Oxygen Warning
If you fly higher than 3.800m (12.500ft) above the sea level,
your cockpit should be pressurized in compliance with JAR-
OPS 1.775. If you want to be informed that the oxygen is
required, select „ENABLE“. The altitude for signalization in the
instrument is default to 3.800m (12.500ft). If you do not want
to be informed that the oxygen is required, select „DISABLE“.
CONTINUE
CONTINUE
................
..............
USER BUTTON
SELECT
elektronic
SHOW MAX. ALT
SHOW QNH OR FL
ALTITUDE
encoder
5.12 User Button
When pressed, the external User button offers you the
possibility of programming to quick show or quick switch to
the selected menu. After releasing the button, you will get
back the measured value indication. For example - if you have
set SHOW QNH or FL, after pressing the button you can
monitor barometric pressure.
5.13 iFamily® and Other Connecting Devices
As the first of aircraft instruments, the TL-3524 offers you
the possibility of connecting with other instruments from the
TL elektronic family, in order to gain simultaneous recording
of the measured values, mass PC download of all connected
instruments etc. via one cable.
If some other instruments or the GPS are connected to the
reserved inputs, this menu shows each connected instrument.
It also enables checking the connected instruments and devices.
