6.6 Set MDA or Approach Altitude
By pressing the button „MODE“ a few times, you enter this
menu where you can set the altitude for the MDA
or the approach altitude. This setting is necessary to be done
always after turning the instrument on or off. The instrument
stores the latest set datum that will be shown on the display
when being set the next time.
6.7 MDA or Approach Warning
If your aircraft reaches the MDA or the approach altitude, the
instrument will activate the acoustic or visual signalization and
this message will show on the display repeatedly in regular
intervals. You can disable the signalization (including the „MDA“
message) any time by pressing the left, the right or the User
button.
6.8 Set Different Transition Altitude
For example, if your are in another country where the transition
altitude differs from the one default in the Setup Mode,
according to the point 5-6, you can change the altitude in this
menu.
Note that if you turn the instrument off and on, the altitude
will be set again to the default value, according to the point 5-6.
6.9 „TRANSITION ALTITUDE REACHED“ Message
If you reach the transition altitude, the instrument will activate
the acoustic or visual signalization and this message
will show on the display. If you want the instrument to change
the barometric pressure automatically from the QNH
to the National Bureau Standard (FL ) 1013,25hPa
(29.92inHg), press the button „YES“.
Page 6-4
TL-3524 USER`S MANUAL
Rev. B
P/N 03-3524-2003
MDA
NEXT
FL 1013
elektronic
ALTITUDE
encoder
1600
NEXT
SET
elektronic
ALTITUDE
encoder
m
TA
100
NEXT
OFF
elektronic
ALTITUDE
encoder
m
MDA
NO
elektronic
TRANSITION ALT
IS REACHED.
CHANGE QNH TO FL?
!
ALTITUDE
encoder
YES
