6.3 How to Change Configuration
If you want to change e.g. units or contrast, press and hold both
buttons and turn the instrument on. The „SETUP“ message will
show on the display. Press „OK“ and go to the Instrument
Setup.
Note, that any unauthorized change of the values in the Setup can cause damage to the instrument.
An incorrect change of the setup can endanger your life and lives of your passengers.
6.4 Set Alert Warning
By pressing the button „MODE“ a few times, you enter this
menu where you can set the altitude you want to keep. This
setting is necessary to be done always after turning the
instrument on or off. The instrument stores the latest set datum,
which will be shown on the display when being set the next
time.
6.5 How Alert Warning Works
If your aircraft is more than 50m (165ft) above or below the set
altitude, the instrument will activate the acoustic or visual
signalization. In the left part of the display an up or down arrow
will show. The arrow demonstrates the direction the aircraft
should follow in order to keep the set altitude.
Page 6-3
TL-3524 USER`S MANUAL
Rev. B
P/N 03-3524-2003
OK
NO
elektronic
SETUP
SETUP CONTINUE?
ALTITUDE
encoder
9800
ALT
ft
NEXT
QNH 1005
elektronic
ALTITUDE
encoder
OFF
NEXT
SET
elektronic
ALTITUDE
encoder
ALERT
