8 Troubleshooting
Improper or incorrect wiring is the cause of most problems. The first step in troubleshooting is therefore
always to check all wiring for loose connections or possible shorts/opens. The next step is to check for the
most common failures.
Solve a problem by following the corresponding corrective action. If the problem still remains, contact the
assembler of the system.
Common failures
No. Failure
Possible Cause
Corrective Action(s)
1
CEDD
®
HPS Basestation
shows warning or error
messages.
Messages are displayed
to diagnose if the system
functions correctly and are
not necessarily instrument
failures.
Contact TKH Airport Solutions Customer
Service [email protected] for
an explanation of messages.
2
Fixtures connected to the
CEDD
®
HPS Basestation
do not work.
No Power AC mains
power or no Logic AC
mains power
•
Switch off the CEDD
®
HPS Basestation,
wait for 2 minutes, then switch it on
again.
•
Check whether the front panel display is
illuminated.
•
If not, refer to failure #1
•
If illuminated, check whether the
cooling fans are running (wait
30 seconds after turning on the
device).
•
Make sure that the Power AC mains and
the Logic AC mains power supplies have
been connected correctly.
•
Check whether sufficient AC power is
supplied (230 V ±10%). If the supplied
power is sufficient, contact TKH Airport
Solutions
3
Front panel display is not
illuminated (no display)
after power on.
No Logic AC mains power
•
Make sure that the Power AC mains
power supply has been connected
correctly.
•
Check whether sufficient AC power is
supplied (230 V ±10%). If the supplied
power is sufficient, contact TKH Airport
Solutions
4
Front panel key is
unresponsive.
Keyboard connection
is loose or keyboard is
broken.
•
Do not disassemble the CEDD
®
HPS
Basestation. Contact the installer of the
system.
For a full list of the error messages that can appear in the front panel display, see the CEDD
®
HPS
Basestation Commissioning Manual.
32
Installation and Maintenance Manual - CEDD
®
HPS Basestation
©
TKH Airport Solutions 2022. All rights reserved. All specifications subject to change without notice.