To connect the CEDD
®
HPS Basestation, follow the steps below:
1.
Remove the bottom panel by loosening two screws at the front using a Philips PH2 screwdriver.
Detach the protective earth wire.
2.
Connect the cabinet to the protective earth using an M4 (7 mm) hex socket tightened to 2 Nm with a
ratcheting socket wrench (or equivalent).
1.
M4 serrated lock
washer
2.
M4 ring tongue
terminal with earth
cable 4 mm
2
3.
M4 plain washer
4.
M4 self-locking nut
Installation and Maintenance Manual - CEDD
®
HPS Basestation
©
TKH Airport Solutions 2022. All rights reserved. All specifications subject to change without notice.
23
