7 Maintenance
7.1 Maintenance Safety
Before you begin, read these warnings carefully.
•
Before performing any maintenance, switch off the equipment, disconnect and lock
out the electrical power.
•
Wait at least 15 minutes after de-energizing the CEDD
®
HPS Basestation before
performing maintenance.
•
Only trained and qualified personnel is allowed to maintain the equipment.
7.2 Preventive Maintenance
Preventive maintenance of the CEDD
®
HPS Basestation is limited to cleaning the outside of the cabinet.
7.2.1 Cleaning
Under no circumstances should fluid be allowed to enter the CEDD
®
HPS Basestation.
To clean the outside of the CEDD
®
HPS Basestation:
1.
Remove any dirt on the cabinet with a soft, moist cloth.
If necessary, add a mild detergent (water and 1% soap).
2.
Check the cooling air inlets and outlet and remove any obstructions or dust on the outside of the
cabinet.
3.
If the display window is dirty, clean it with adhesive tape (Scotch Mending Tape No. 810 or equivalent).
Do not use cleaning fluids, such as alcohol, ketone, aromatic solvents or paste, on the
display window. This can damage the polarized surface of the OLED display.
Installation and Maintenance Manual - CEDD
®
HPS Basestation
©
TKH Airport Solutions 2022. All rights reserved. All specifications subject to change without notice.
27
