3.
Screw the supporting bolts into the holes (min. 6 mm (B)), leaving a space of 4 to 8 mm (A) between
the head of the bolt and the support structure.
4.
Place the CEDD
®
HPS Basestation: let the lower mounting slots of the CEDD
®
HPS Basestation slide
slowly and smoothly onto the lower bolts.
5.
Place the upper mounting slots over the highest bolts and carefully lower the CEDD
®
HPS Basestation
onto the four bolts.
6.
Fasten the four supporting bolts: use a wrench to hand-tighten the four supporting bolts clockwise
until the CEDD
®
HPS Basestation is fixed.
Installation and Maintenance Manual - CEDD
®
HPS Basestation
©
TKH Airport Solutions 2022. All rights reserved. All specifications subject to change without notice.
21
