6.3.1.3
Use PPPoE
The Point-to-Point Protocol over Ethernet (PPPoE) enables users to transfer data securely.
To use PPPoE
1
On the System tab, click Network in the menu on the left.
2
In the Network submenu, select Basic.
3
Click Use PPPoE.
4
Specify the PPPoE user name and password.
5
Click Save.
6.3.1.4
Advanced settings
Web Server port
The HTTP port can be any port other than the default port, 80. If the port is changed, the user
must be notified of the change for connections to be successful.
For example, if the administrator changes the HTTP port of a camera with an IP address of
192.168.0.100 from 80 to 8080, the user must type in the address http://
192.168.0.100:8080 instead of http://192.168.0.100.
RTSP port
The RTSP port can be any port other than the default port, 554. If the port is changed, the
user must be notified of the change for connections to be successful. The port number may
range from 1024 to 65535.
For example, if the administrator changes the RTSP port of a camera with an IP address of
192.168.0.100 from 554 to 8080, the user must type in the address rtsp://
192.168.0.100:8080 instead of rtsp://192.168.0.100.
MJPEG over HTTP port
The HTTP port that streams MJPEG can be any port other than the default port, 8008. If the
port is changed, the user must be notified of the change for connections to be successful. The
port number may range from 1024 to 65535.
For example, if the administrator changes the MJPEG over HTTP port of a camera with an IP
address of 192.168.0.100 from 8008 to 8080, the user must type in the address http://
192.168.0.100:8080 instead of http://192.168.0.100.
HTTPS port
The HTTPS port can be any port other than the default port, 443. If the port is changed, the
user must be notified of the change for connections to be successful. The port number may
range from 1024 to 65535.
For example, if the administrator changes the HTTPS port of a camera with an IP address of
192.168.0.100 from 443 to 650, the user must type in the address https://
192.168.0.100:650 instead of https://192.168.0.100.
Note: To avoid network conflicts, make sure that you use a unique port number for each of
the ports above.
6.3.1.5
IPv6 address configuration
To enable IPv6 support
1
On the System tab, click Network in the menu on the left.
System settings
37
