TJM Pro Series Twin Compressor: Installation and User Manual
For product warranty please refer to our website www.tjm.com.au
File: F-31070
Page 7 of 23
23/02/2021
o
If necessary, remove the safety relief valve to
provide space for accessory installation.
o
Apply sealant paste (e.g. Loctite 567) or
sealant tape to one end of the threaded
fitting of the accessory.
o
Recommended installation positions for the
Pro-Locker solenoids are as shown.
o
Other fittings can be installed on any other
spare port.
o
If the safety relief valve was removed, apply
sealant paste or sealant tape and re-install
the valve to the same port.
o
If using a thread sealant allow curing time
according to the manufacturer specification.
NOTE:
DO NOT over-tighten, may cause damage
to thread.
