![background image](http://html1.mh-extra.com/html/tivoli-audio/portable-audio-laboratory-plus-bt/portable-audio-laboratory-plus-bt_owners-manual_1120488009.webp)
Guide to Features (Rear Panel)
1.
FM/DAB ANTENNA: When listening to FM, adjust this telescoping antenna and posi-
tion it for best reception. In strong FM signal locations, reducing the antenna’s length
may provide better reception. When the unit is not in use keep the antenna retracted
to protect it.
2.
AUXILIARY INPUT: To hear audio from another device (such as a portable CD or MP3
player) through the PAL+BT’s main speaker, connect the device’s audio output to this
input and set the radio's source to Auxiliary Input. This jack accepts a 1/8" stereo male
mini plug. Note that you may need to adjust the volume level differently for an auxiliary
device than the level normally used for radio listening. Keep the rubber plug inserted
when this input is not in use.
3.
HEADPHONE OUTPUT: Connect a headset to this stereo output for private listening.
The headphone volume will be controlled by the PAL+BT’s volume knob. Connecting a
pair of headphones will mute the PAL+BT’s main speaker. This jack accepts a 1/8" stereo
male mini plug. You may also record from the PAL+BT or use it as a high quality stereo
tuner by using this output. Keep the rubber plug inserted when this output is not in use.
4.
BATTERY COMPARTMENT: Stores the Lithium-ion battery pack. Do not load any other
type of batteries in the compartment. See “Replacing the battery pack.”
5.
DC INPUT: Use this input to operate the PAL+BT using its included Tivoli Audio 9V 2A
power supply.
Use only the power supply provided with this product.
Should the
power supply get damaged or misplaced, contact Tivoli Audio for a replacement. Keep
the rubber plug inserted when this input is not in use.
1
3
2
4
5
ABS AG15A1
未標公差,按公差表中B級公差要求管控。
未標R角,請安R1.0mm加工。
流痕、縮水、熔接線、脫傷等不能超過樣板。
方框為新版本修改的位置。
球標為重點管控尺寸,其它為參考尺寸。
所有的材料物質都要符合相關環保要求,詳請參考朝陽程序文件."QMI-P40-01"
沒有標注公差的螺絲內孔直徑,按`0.05管控。
未標尺寸請參照3D。
顏色請按顏色樣板管控。
未做拔模按0.5~加工。
注意:
環保要求:
模具表面處理:普通拋光 噴亮光白漆
+抗UV剂
需通過
測試
成型 加工要求:不能有缺膠,披鋒,變形
;
外觀面不能有刮傷等不良現象;
絲印顏色:432 ;
與前蓋組裝后四周段差小于
后蓋不可高與前蓋)
來料管控:所有尺寸要符合圖紙規格要求,要試裝;
包裝要求:裝
氣泡
袋內,不能碰傷。
成型灰色
噴亮光白漆
14-Mar-2018
14-Mar-2018
14-Mar-2018
14-Mar-2018
XY.Li
XY.Li
XY.Li
Developed and manufactured
Portable Audio Laboratory
by Tivoli Audio
Boston, MA
USA
1-877-297-9479
[email protected]
MADE IN CHINA
AUX IN
9 – ENGLISH
Содержание PORTABLE AUDIO LABORATORY PLUS BT
