NAME OF PARTS
23
24
25
26
27
1 Stitch choosing button
2 Power switch & speed
adjusting button
3 Reverse stitch control
4 Reset
5 Stitch panel
6 Thread tension lever
7 Thread winding bobbin
8 Thread pressing circle
9 Bobbin thread
10 Spool pin
11 Thread clamp
12 Bracket of thread clamp
13 Thread take-up lever
14 Thread tension dial
15 Thread cutter
16 Needle clamp screw
17 Needle
18 Presser foot
19 Drawer
20 Hook cover plate
21 Hook cover release button
22 Handle
23 Bobbin winder spindle
24 Handwheel
25 Foot pedal jack
26 Power jack
27 Presser foot lifter
SECTION . NAME OF PARTS
1
Manual Buttonhole
6.
Choose stitch 3 and stitch adjusting E, push
1. Pull out the drawer on your left side
and push dialing button to the left so
that presser foot is not in cloth feed
status.
2. Put cloth under presser foot and press down
the presser foot on the cloth where you need
to sew buttonhole, then choose stitch and
stitch adjusting E.
3. Turn on switch and sew 3-4 stitch in low
speed, then turn off switch.
4. Choose stitch 2 and keep stitch adjusting in
E place, push the dialing button to the right
side to make presser foot in cloth feed status.
5. Turn on switch and sew on the cloth in
suitable length, then turn off switch. Note
that try to keep sewed stitch in straight line.
dialing button back to the left so that presser
foot is not in cloth feed status.
7. Turn on switch and sew 3-4 stitch in low
speed, then turn off switch.
Dialing
button
SECTION .
SEWING
18
5
2
1
3
4
6
7
8
9
11
10
12
13
14
15
16
17
20
19
22
21
18
