Foot pedal
1
Thread spool
2
Bobbin
2
Needle threader
1
Needle
1
Accessories
SECTION . NAME OF PARTS
2
Button Sewing
Stitch selector: 2 to 3
1.Draw the accessory table and you will see an
adjusting button for button sewing. Push the
button to the left, thus, machine is in the state
of button sewing. Place the button you want
to sew below the zigzag foot, making sure to
align the holes with the horizontal slot in the
foot. Lower the presser foot to hold the button
in place.
2.Determine which stitch width setting matches
the distance between the button holes. The
needle must go safely through each hole when
sewing. Unthread the needle to help you
determine the zigzag width.
3.Thread the needle. Turn the handwheel, so that
the needle is in its leftmost position, and then
drop the needle through the left buttonhole.
4.Press the foot control and sew about 10 stitches.
5.Sew the other row of holes ( if applicable) using
the steps above. Trim excess threads from both sides of the fabric.
SECTION .
SEWING
17
