Titus FFDE, Руководство по установке и эксплуатации

Страница: 13 / 28

13 IOM - FFDE Redefine your comfort zone. ™ | www.titus-hvac.com
Cleaning the Pre-filter (foam)
Tools Required: None.
Note: To keep the filter in top operating condition, washing the foam
prefilter is recommended every three to six months.
Step 1. To gain access to the prefilter, remove the ceiling panel next to the
unit, if applicable.
Step 2. Switch the ON-OFF switch to the off position.
Step 3. Remove the 16”x23” prefilter from the snap-in frame. (See
figure below)
Step 4.
Clean the prefilter by hand washing in water with a mild
detergent or by using a vacuum cleaner. Allow prefilter to dry completely
before replacing.
Step 5. Reassemble by reversing the above steps.
WARNING
DISCONNECT THE UNIT FROM THE ELECTRICAL
POWER SOURCE BEFORE ATTEMPTING
ANY SERVICE
PREFILTER SURFACE ON TOP SIDE
SUPPORT SCREEN ON BOTTOM SIDE
ON/OFF SWITCH