23
MWDV16L-A by
MacAllister
Getting
Started ...
Liquid collection
NOTE:
Always ensure the cartridge filter (25) and dust bag (26) are NOT
used for wet vacuuming.
> Slide the foam sleeve (24) onto the motor unit (2) (Fig. 12). Ensure it sits
properly in position. Refer to Fig. 21.
> Place the motor unit (2) with foam sleeve (24) onto the tank (4) and secure it
with the clasps (3) (Fig. 13). Ensure the motor unit sits properly on the tank and
the connection is properly sealed.
2
24
4
1.
3.
2.
2
3
Hose (vacuuming)
> Align the arrow on the hose connector (18b) with the tab on the outer opening
of the air inlet (9) and slide the hose connector into the outer opening of the air
inlet (Fig. 14, step 1).
> Rotate the hose connector (18b) clockwise and ensure the connection is
properly secured (Fig. 14, step 2).
> Rotate the hose connector (18b) anticlockwise and pull it from the air inlet (9) to
disconnect the hose (18) after use (Fig. 15).
Before you start
Fig. 12
Fig. 13
TTB777VAC by
TITAN
