33
MWDV16L-A by
MacAllister
In
more
detail ...
WARNING! Do not plug any tool or appliance rated over the
maximum wattage for the receptacle as noted in the chart above
into the electrical socket on the vacuum cleaner.
Check nameplate of the tool for the wattage rating. To reduce the
risk of injury, additional power tool must be turned (O) OFF before
placing on/off switch (11) in the (II) AUTO position. (NEVER LEAVE
THE UNIT RUNNING OR PLUGGED IN UNATTENDED).
The power switch is used to select the automatic tool triggering feature built
into the vacuum. With the (I) ON position selected, the vacuum will simply run
continuously. When the (II) AUTO position is selected (Fig. 30), the vacuum will
automatically turn on and off when the power tool is turned on and off.
For the auto tool triggering feature to work, the power tool must draw a minimum
of 60 Watts.
The maximum wattage rating for the electrical socket is rated in the chart above.
Lift cover upward on the receptacle to access the socket (Fig. 31). If the plug
you are inserting does not match the socket construction, do not attempt any
modifications as this could cause a hazard and will void any warranty.
After use
> Switch the product off and disconnect it from the power supply.
> Disconnect the respective attachment, extension tube(s) (19) and hose (18) if
necessary.
> Let the product cool down.
> Check, clean and store the product as described below.
Operation
11
10
Fig. 30
Fig. 31
TTB777VAC by
TITAN
