7
MWDV16L-A by
MacAllister
Getting
Started ...
Safety information
> If the product should start making any unusual noise
or vibration, immediately shut off the power source and
allow the product to stop. Disconnect the product from
the supply and take the following steps before restarting
and operating the product:
- inspect for damage;
- replace or repair any damaged parts;
- check for and tighten any loose parts.
> Keep the power source clean of debris and other
accumulations to prevent damage to the power source
or possible fire.
> Do not transport this product while the power source is
running.
> Stop the product, shut off the power source and
disconnect the product from the supply. Make sure that
all moving parts have come to a complete stop
- whenever you leave the product,
- before clearing blockages or unclogging chute,
- before checking, cleaning or working on the product,
> Do not tilt the product while the power source is running.
> Walk, never run.
>
Operate the product only in daylight or in good artificial
light.
> Do not blow hard objects such as nails, bolts, or rocks.
> Apply extra care when cleaning debris from stairs or
other tight areas.
Follow below recommendations when using the
product:
>
Use rakes and brooms to loosen debris before blowing/
vacuuming.
TTB777VAC by
TITAN
